Rodgers Instruments W-5000 Betriebsanweisung PDF herunterladen (Seite 99)

Using MIDI

MIDI Mst In Filt

U: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data will be filtered out of the incoming data via the Master MIDI

Input for the Upper section. The following options can be selected:

• NONE : No filtering is done

• PC : Program Changes (preset selections) are filtered

• CC : Control Changes (such as UPPER Drawbars and UPPER BALANCE sliders) are filtered

• CC+PC : Control Changes and Program Changes are filtered

• NOTE : Note data is filtered

• PC+Not : Program Changes and Note data are filtered

• CC+Not : Control Changes and Note data are filtered

• All : All data is filtered

Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select 'CC+PC'.

MIDI Mst In Filt

L: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data will be filtered out of the incoming data via the Master MIDI

Input for the Lower section. The options outlined above apply. Press [NEXT] to select this parameter. Use

the [+]/[-] buttons to select 'CC+PC'.

MIDI Mst In Filt

P: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All

This parameter determines what type of data will be filtered out of the incoming data via the Master MIDI

Input for the Pedal (Bass) section (Pedalboard or Keybass). The options outlined above apply. Press [NEXT]

to select this parameter. Use the [+]/[-] buttons to select 'CC+PC'.

MIDI Mst In

Exp CC#: 7, 11

This parameter determines which Control Change command is executed when the Expression pedal is

moved: 7 or 11. Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select '7'.

These parameters are stored in the Global Parameter's memory if you press the [SET] and [ROTARY]

buttons simultaneously. In addition, changing parameters may result in data being output to the MIDI port(s),

so you will be able to hear the results immediately.

Program Changes coming in on the Master MIDI Input are interpreted (if not filtered out) as General Preset

selections. Since the General Presets are 'general', it doesn't matter which section is receiving the Program

Changes. However, they are always transmitted (and, therefore, recorded) on the Lower MIDI Master

Channel. The Program Numbers representing specific presets are as outlined below:

Program # Action

1 Selects General Preset [1]

2 Selects General Preset [2]

3 Selects General Preset [3]

4 Selects General Preset [4]

5 Selects General Preset [5]

6 Selects General Preset [6]

7 Selects General Preset [7]

8 Selects General Preset [8]

20 Selects Cancel

31 Selects Memory 1

32 Selects Memory 2

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 164 165

Kommentare zu diesen Handbüchern

Keine Kommentare

Rodgers Instruments W-5000 Betriebsanweisung Seite 99

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Rodgers Instruments W-5000